Multi Area Economic Dispatch Using Secant Method and Tie Line Matrix
Abstract
In this paper, Secant method and tie line matrix are proposed to solve multi area economic dispatch (MAED) problem with tie line loss. Generator limits of all generators in each area are calculated at given area power demands plus export (or import) using secant method and the generator limits of all generators are modified as modified generator limits. Central economic dispatch (CED) problem is used to determine the output powers of all generators and finally power flows in all tie lines are determined from tie line matrix. Here, Secant method is applied to solve the CED problem. A modified tie line matrix is used to find power flow in each tie line and then tie line loss is calculated from the power flow in each tie line. The proposed approach has been tested on two-area (two generators in each area) system and four-area (four generators in each area) system. It is observed from various cases that the proposed approach provides optimally best solution in terms of cost with tie line loss with less computational burden.
Keywords
Economic dispatch, Tie line limits, Tie line Loss, Tie line matrix, Export and Import.
Full Text:
PDFDOI: http://doi.org/10.11591/ijape.v2.i3.pp115-124
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
International Journal of Applied Power Engineering (IJAPE)
p-ISSN 2252-8792, e-ISSN 2722-2624