Fast band power measurement technique in Wi-Fi systems using spectrum analyzer
Abstract
Fast band power measurement technique used for measuring band power in wireless fidelity (Wi-Fi) devices. The difficulty during testing the band power is burst mode transmission takes longer time to measure. A test jig or specialized tool required is costly, which allows continuous mode of transmission for power measurement. The delivered average power by a Wi-Fi device depends upon the data rate which can also vary during time. The procedure proposed hereby developed using a spectrum analyzer to measure band power in the burst mode, in order to ensure repeatable results and optimized to enable fast measurements at low cost, less time and above 90% accurate.
Keywords
band power; fast measurement; low cost; OFDM signals; spectrum analyzer; Wi-Fi device
Full Text:
PDFDOI: http://doi.org/10.11591/ijape.v11.i1.pp1-6
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
International Journal of Applied Power Engineering (IJAPE)
p-ISSN 2252-8792, e-ISSN 2722-2624