**International Journal of Applied Power Engineering (IJAPE)**

**There are 138 cited papers in the Scopus database, with a citation frequency of 389 times.****Source: Scopus (Export Date: 24 Oct 2022)**

1. Abdollahi, A.

Induction motor drive based on direct torque controlled used multi-pulse AC-DC rectifier

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (2), pp. 89-96. Cited 1 time.

2. Khan, S., Saini, M.

A comprehensive study on energy meters and power tampering attempts

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (4), p. 315. Cited 1 time.

3. Safarian, S., Unnthorsson, R., Richter, C.

Performance analysis of power generation by wood and woody biomass gasification in a downdraft gasifier

(2021) International Journal of Applied Power Engineering (IJAPE), 10, pp. 80-88. Cited 4 times.

4. Lenin, K.

Solving optimal reactive power problem by hurricane search optimization algorithm

(2021) International Journal of Applied Power Engineering (IJAPE), 10, p. 26. Cited 1 time.

5. Sirisha, B.

A grid interconnected nested neutral point clamped inverter with voltage synchronization using synchronous reference frame controller

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (4), pp. 364-372. Cited 2 times.

6. Gebrehiwot, M.H.

Speed control of PM brushless DC motor using sensorless hybrid controller

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (2). Cited 1 time.

7. Saravanan, V.

Grid integration of PMSG based wind energy conversion with battery storage system

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (1), p. 48. Cited 1 time.

8. Chanda, C. K., Samanta, S. K.

Smart power grid vulnerability analysis in composite system through power grid modelling

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (1), pp. 11-20. Cited 1 time.

9. Govind, A., Tayal, V.K., Kumar, P.

Performance enhancement of shunt active power filter using soft computing techniques

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (3), pp. 253-261. Cited 2 times.

10. Bhaskar, C., Sheri, S., Suram, A.

Numerical analysis of MHD Casson fluid flow over an exponentially accelerated vertical plate in embedded porous medium with ramped wall temperature and ramped surface concentration in uniform magnetic field

(2020) International Journal of Applied Power Engineering (IJAPE), 9, pp. 89-99. Cited 2 times.

11. Benbouhenni, H.

ANFIS-sliding mode control of a DFIG supplied by a two-level SVPWM technique for wind energy conversion system

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (1), pp. 36-47. Cited 3 times.

12. Babu, R., Bhattacharyya, B.

Optimal placement of PMU for complete observability of the interconnected power network considering zero-injection bus: A numerical approach

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 135-146. Cited 10 times.

13. Mukherjee, A., Kundu, P.K., Das, A.

Power system fault identification and localization using multiple linear regression of principal component distance indices

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 113-126. Cited 10 times.

14. Yusuf, T.S., Gambo, D.

Role of heat source/sink on time dependent free convective flow in a coaxial cylinder filled with porous material: A semi analytical approach

(2020) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 67-77. Cited 8 times.

15. Bougouffa, L., Chaghi, A.

Effect of Renewable Energy Sources Integration on the Optimal Coordination of Directional Over-Current Relays in Distribution System

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (3), pp. 250-255. Cited 3 times.

16. Qays, O., Yasmin, F.

Renewable energy production based on solar power and magnetic field prototype in Bangladesh

(2020) International Journal of Applied Power Engineering (IJAPE), 8, pp. 29-35. Cited 4 times.

17. Toubal Maamar, A. E., Helaimi, M., Taleb, R., Gadoum, A.

Modeling and control of 41-level inverter using best switching angles calculation method

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 153-158. Cited 2 times.

18. Lenin, K.

Power loss reduction by chaotic based predator-prey brain storm optimization algorithm

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (3), pp. 218-222. Cited 2 times.

19. Benbouhenni, H., Boudjema, Z., Belaidi, A.

Comparison study between NPWM and NSVPWM strategy in FSMC control of stator reactive and active powers control of a DFIG-based wind turbine system

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 159-172. Cited 1 time.

20. Yasin, A., Alsayed, M.

Optimization with excess electricity management of a PV, energy storage and diesel generator hybrid system using HOMER Pro software

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (3), pp. 267-283. Cited 3 times.

21. Lenin, K.

Polar wolf optimization algorithm for solving optimal reactive power problem

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 107-112. Cited 1 time.

22. Lenin, K.

Solving optimal reactive power problem by enhanced fruit fly optimization algorithm and status of material algorithm

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 100-106. Cited 2 times.

23. Jha, B.K., Yusuf, T.S.

Transient development of MHD natural convection flow in vertical concentric annulus

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (1), pp. 58-66. Cited 1 time.

24. Lenin, K.

Diminution of factual power loss by enhanced bacterial foraging optimization algorithm

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (3), p. 245. Cited 1 time.

25. Reddy, P.L., Guduri, Y.

A hybrid bacterial foraging-particle swarm optimization technique for solving optimal reactive power dispatch problem

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), p. 127. Cited 1 time.

26. Safarian, S., Unnthorsson, R., Richter, C.

Simulation of small-scale waste biomass gasification integrated power production: A comparative performance analysis for timber and wood waste

(2020) International Journal of Applied Power Engineering (IJAPE), 9, pp. 147-152. Cited 8 times.

27. Benbouhenni, H.

Comparison study between seven-level SVPWM and two-level SVPWM strategy in direct vector control of a DFIG-based wind energy conversion systems

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (1), pp. 12-21. Cited 3 times.

28. Rohit, B., Biplab, B.

Optimal placement of PMU for complete observability of the interconnected power network considering zero-injection bus: A numerical approach

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (2), pp. 135-146. Cited 1 time.

29. Venkatachalam, K. M., Saravanan, V.

Performance evaluation and load demand management of grid connected hybrid wind-solar-battery system

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (3), pp. 223-244. Cited 1 time.

30. Hadi, M.K.

Utilization of the finite element method for the calculation and examination of underground power cable ampacity

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (3), pp. 257-264. Cited 4 times.

31. Samuel, G. G., Muthuramaligam, M., Manoharan, P. S., Rajan, C. C. A.

Control of a stand-alone photovoltaic/battery bank system to supply energy to resistance load

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 93-100. Cited 1 time.

32. Hashmia, S., Zainab, B., Helen, J.

Faults detection and diagnoses of permanent magnet synchronous motor based on neuro-fuzzy network

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 173-185. Cited 1 time.

33. Nagaraju, M.

Wavelet based performance analysis of AC transmission systems with unified power flow controller under power quality issues

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (3), pp. 299-308. Cited 1 time.

34. Dakheel, Hashmia Sh., Abdulla, Z. B., Jawad, H. J.

Faults detection and diagnoses of permanent magnet synchronous motor based on neuro-fuzzy network

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 173-185. Cited 3 times.

35. Benziane, M., Ayad, M., Saoudi, K., Rezki, M.

Estimation of daily vertical solar irradiation by the use of meteorological data

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1). Cited 1 time.

36. Afif, B., Merabet, B., Benhamou, A., Chaker, A.

Standalone hybrid power system using homer software optimal case sizing of ferraguig (Northwest of Algeria)

(2019) International Journal of applied Power Engineering (IJAPE), 8 (3), pp. 287-298. Cited 1 time.

37. Raja, J., Jain, Nishant, Christober Asir Rajan, C.

Grid Connected Mega-Watt Range Solar Power Plant in India: Experimental Measurement & Performance Analysis

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 22-33. Cited 1 time.

38. Bennouk, A., Nejmi, A., Ramzi, M.

Performance and FMECA of a wind turbine based on SCADA and lidar data

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 101-109. Cited 1 time.

39. El-Sharkawy, Mahmoud M., Attia, Mahmoud A., Abdelaziz, Almoataz Y.

Enhancement of power system performance with wind farm disturbances

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 159-172. Cited 5 times.

40. Ahmed, R., AdlyMahmoud, A.

ElsaddA novel wavelet packet transform-based fault identification procedures in HV transmission line based on current signals

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1). Cited 1 time.

41. Benbouhenni, H.

A comparison study between fuzzy PWM and SVM inverter in NSMC control of stator active and reactive power control of a DFIG based wind turbine systems

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 78-92. Cited 8 times.

42. Aravindan, M., Balaji, V., Saravanan, V., Arumugam, M.

Performance Evaluation of Roof Top Solar Photovoltaic Systems in Tamilnadu

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (3), pp. 265-276. Cited 1 time.

43. Ghayad, Mohamed S., Badra, Niveen M., Abdelaziz, Almoataz Y., Attia, Mahmoud A.

Reactive power control to enhance the VSC-HVDC system performance under faulty and normal conditions

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 145-158. Cited 2 times.

44. Latreche, Y., Bouchekara, H. R. E. H., Javaid, M. S., Aman, M. M., Mokhlis, H., Kerrour, F.

Optimal incorporation of multiple distributed generation units based on a new system maximum loadability computation approach and vortex searching algorithm

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 186-208. Cited 2 times.

45. Agrawal, A., Lodhi, R. S., Nema, P.

Indirect vector control for induction motor drive using two level and five level inverter

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (2), pp. 134-144. Cited 2 times.

46. Adly, A.R., El Sehiemy, R.A., Elsadd, M.A., Abdelaziz, A.Y.

A novel wavelet packet transform based fault identification procedures in HV transmission line based on current signals

(2019) nternational Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 11-21. Cited 5 times.

47. Alabi, A. A., Adoghe, A. U., Ogunleye, O. G., Awosope, C. O. A.

Development and sizing of a grid-connected solar PV power plant for Canaanland community

(2019) International Journal of Applied Power Engineering (IJAPE), 8 (1), pp. 69-77. Cited 2 times.

48. Balamurugan, C. R.

Three Area Power System Load Frequency Control Using Fuzzy Logic Controller

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 18-26. Cited 4 times.

49. Karthik, N., Parvathy, A.K., Arul, R.

Optimal operation of microgrids-A survey

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 179-185. Cited 6 times.

50. Sinha, Garima, Goswami, Pankaj kumar, Sharma, Sudhir kr.

Harmonic Mitigation for Non-Linear Load using TSH Active Power Filter with PID Controller

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 159-165. Cited 1 time.

51. Dris, M., Djilani, B.

Hybrid system power generation 'Wind-photovoltaic' connected to the electrical network 220 kV

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 10-17. Cited 4 times.

52. Albreem, M.A.M., Aspan, R.M.

Micro hydropower system design for gua Kelam electricity supply

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 116-118. Cited 2 times.

53. Saleh, Y.

Netload-constrained UC considering increasing renewable energy penetration levels: Impact of generation schedules and operational cost

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 87-98. Cited 1 time.

54. Dey, T., Chowdhury, A.K., Alam, S.M., Mondal, S.

Analysis of six-phase interior permanent magnet synchronous machines for optimal parameter considerations

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 139-146. Cited 1 time.

55. Serhoud, H., Benattous, D.

Sensorless control of brushless doubly-fed generator using Luenberger observer based wind energy conversion systems

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 188-776. Cited 1 time.

56. Khichar, S., Gopal, Y., Lalwani, M.

An Enhanced Control Strategy for the Stable Operation of Distributed Generation during Grid-connected and Islanded Mode

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 145-156. Cited 1 time.

57. Kanchikere, J., Ghosh, A. K., Kalyankumar

Design and Simulation Analysis of Three-phase Transformer less Grid-connected PV Inverters

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (3), pp. 211-226. Cited 1 time.

58. Susheela, N., Satish Kumar, P.

Multicarrier SPWM Control Techniques for Three Phase Eleven Level Diode Clamped Multilevel Inverter and Hybrid Inverter with Reduced Number of Components

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (3), pp. 251-263. Cited 1 time.

59. Balamurugan, C. R., Bensraj, R.

Analysis of Various Carriers Overlapping PWM Strategies for a Single Phase Ternary Multilevel Inverter

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 27-39. Cited 3 times.

60. Subramanya, S.S., Madhusudhan, V., Ganesh, V.

Reliability worth Assessment of Active Distribution System Considering Protective Devices and Multiple Distributed Generation Units

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 111-119. Cited 3 times.

61. Cherifi, D., Miloud, Y.

Robust Speed-Sensorless Vector Control of Doubly Fed Induction Motor Drive Using Sliding Mode Rotor Flux Observer

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (3), pp. 248-263. Cited 2 times.

62. Rezaei, S., Khederzadeh, M., Gandomkar, M.

A Fault Detection Technique for Series-Compensated Lines by TCSC during Power Swing

(2018) International Journal of Applied Power Engineering (IJAPE). Cited 1 time.

63. Abouobaida, H., El Bied, S.

Modeling and Control Design for Energy Management of Grid Connected Hybrid PV-Wind System

(2018) International Journal of Applied Power Engineering (IJAPE), 7, pp. 164-178. Cited 2 times.

64. Lenin, K.

Meleagris Gallopavo Algorithm for Solving Optimal Reactive Power Problem

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (2), pp. 99-110. Cited 1 time.

65. Kumar Rath, P., Charan Bhuyan, K.

Vector Control of VSC HVDC System under Single Line to Ground Fault Condition

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 59-64. Cited 1 time.

66. Phani Kumar, C., Kumar, T.

A novel on stability and fault ride through analysis of type-4 wind generation system integrated to VSC-HVDC link

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 52-58. Cited 2 times.

67. Qonain, R., Rafi, M., Khan, I., Sageer, S.

Ecological and economical friendly analysis of a hybrid solar grid diesel connected power generation system

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 1-9. Cited 1 time.

68. Rezaei, S., Khederzadeh, M., Gandomkar, M.

A fault detection technique for series-compensated lines by TCSC during power swing

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 40-51. Cited 1 time.

69. Hicham, S., Benattous, D.

Sensorless control of brushless doubly-fed generator using luenberger observer based wind energy conversion systems

(2018) International Journal of Applied Power Engineering (IJAPE), (2), pp. 186-196. Cited 1 time.

70. Lenin, K.

Descending viewer method for fault tolerant control

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (3), pp. 199-210. Cited 1 time.

71. Choudhary, N.K., Mohanty, S.R., Singh, R.K.

Power Management in Microgrid: Analysis in Grid Connected and Islanded Mode of Operation

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (3), pp. 163-173. Cited 3 times.

72. Abouobaida, H.

New Optimization Method of the MPPT Algorithm and Balancing Voltage Control of the Three-Level Boost Converter (TLBC)

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (2), pp. 113-122. Cited 1 time.

73. Siddiqui, K. M., Sahay, K., Giri, V. K.

Stator Inter-turn Fault Detection in Inverter Fed Induction Motor Drives

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (2), pp. 89-102. Cited 1 time.

74. Dhillon, S.S., Lather, J.S., Marwaha, S.

Steady state and transient analysis of grid connected doubly fed induction generator under different operating conditions

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (3), pp. 171-192. Cited 1 time.

75. Chahid, E., Idali Oumhand, M., Malaoui, A.

A Fast Strategy to determine the Physical and Electrical Parameters of Photovoltaic Silicon Cell

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (2), pp. 104-113. Cited 3 times.

76. Vidhya, B., Srinivas, K.N.

Small Scale Wind Generation System: Part I–Experimental Verification of Flux Reversal Generator Block

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (1), pp. 1-12. Cited 1 time.

77. Subhadra, A.S., Linga Reddy, P., Modi, S.B.

Islanding detection in a distribution system with modified dg interface controller

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (3), pp. 135-143. Cited 13 times.

78. Pradhan, A.K., Mohanty, M.K., Kar, S.K.

Techno-economic evaluation of standalone hybrid renewable energy system for remote village using HOMER-pro software

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (2), pp. 73-88. Cited 3 times.

79. Choudhary, K., Kumar, R., Upadhyay, D., Singh, B.

Optimal power flow based economic generation scheduling in day-ahead power market

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (3), pp. 124-134. Cited 2 times.

80. Iqbal, M.T., Tariq, M.

Modeling, Analysis and Control of Different DC-DC Converter Topologies for Photo Voltaic Emulator

(2017) International Journal of Applied Power Engineering (IJAPE), 6, pp. 46-55. Cited 1 time.

81. Pradhan, A.K., Mohanty, M.K., Kar, S.K.

Techno-Economic Evaluation of Stand-alone Hybrid Renewable Energy System for Remote Village Using HOMER-Pro Software

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (2), pp. 74-89. Cited 2 times.

82. Ardhenta, L., Wijono

Photovoltaic Array Modeling under Uniform Irradiation and Partial Shading Condition

(2017) International Journal of Applied Power Engineering (IJAPE), 6 (3), pp. 144-152. Cited 2 times.

83. Bhutada, S., Nigam, S.R.

Single phase pv inverter applying a dual boost technology

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (2), pp. 95-102. Cited 2 times.

84. Reddy, S. Y., Reddy, D. S., Rao, G. K.

Optimal siting and sizing of solar power sources in interconnection grid system

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (1), pp. 1-13. Cited 1 time.

85. Fuada, S.

Proposed an intelligent system for electricity theft detector at smart city scenarios

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (1), p. 51. Cited 1 time.

86. Joshi, K., Chandrakar, V.

Transient Stability Improvement using UPFC-SMES in a Multi Machine Power System

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (1), pp. 14-21. Cited 4 times.

87. Nawaz, S., Bansal, A., Sharma, M.P.

An analytical approach for dg placement in reconfigured distribution networks

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (3), pp. 137-143. Cited 3 times.

88. Hajivar, G.A.M.H., Mortazavi, S.S.

Impact of shunt facts devices on security constrained unit commitment

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (1), pp. 22-39. Cited 2 times.

89. Venkateshkumar, M., Raghavan, R.

Hybrid photovoltaic and wind power system with battery management system using fuzzy logic controller

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (2), pp. 72-78. Cited 3 times.

90. Inkollu, Sai Ram, Kota, Venkata Reddy

A Multi ObjectiveHybrid Heuristic Approach for Optimal Setting of FACTS Devices in Power System Operation

(2016) International Journal of Applied Power Engineering (IJAPE), pp. 120-129. Cited 1 time.

91. Vijaykrishna, G., Kusumalatha, Y.

Design and implementation of three phase reversing voltage multilevel inverter

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (2), pp. 59-71. Cited 1 time.

92. Vatani, M.

Transient analysis of switching the distributed generation units in distribution networks

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (3), pp. 130-136. Cited 5 times.

93. Lavanya, M., Jyothi, B.

Performance analysis of 5-Phase Multi-level Inverter Using Carrier Based PWM Technique

(2016) International Journal of Applied Power Engineering (IJAPE), 5 (3), pp. 151-158. Cited 6 times.

94. Sreedhar, M., Panigrahi, C.K., Dasgupta, A., Pati, J.

A New Advanced Topology for Photo Voltaic Applications

(2015) International Journal of Applied Power Engineering (IJAPE), 4 (1), pp. 23-29. Cited 1 time.

95. Alifah, G.S., Raziqy, M.A.

Design of distributed generation with a hybrid system in karimunjawa island

(2015) International Journal of Applied Power Engineering (IJAPE), 4 (3), pp. 96-103. Cited 1 time.

96. Thabet, A., Mobarak, Y.

Practical Measurements for Electric Properties of Polyethylene Nanocomposite Thin Films under Thermal Conditions

(2015) International Journal of Applied Power Engineering (IJAPE), 4 (3), pp. 126-136. Cited 1 time.

97. Olatona, G.I., Adegoke, C.W.

Analysis of Solar Radiation Availability for Deployment of Solar Photovoltaic (PV) Technology in a Tropical City

(2015) International Journal of Applied Power Engineering (IJAPE), 4 (1), pp. 41-46. Cited 1 time.

98. Rajan, R., Venkateswararao, B., Kumar, G.V.N.

Influence of static var compensator for under voltage load shedding to avoid voltage instability

(2015) International Journal of Applied Power Engineering (IJAPE), 6 (1), pp. 10-17. Cited 1 time.

99. Gouda, Pramod Kumar, Hota, Prakash Kumar

Impact of FACTS Devices in Optimal Generation in Deregulated Power System

(2015) International Journal of Applied Power Engineering (IJAPE), pp. 118-125. Cited 1 time.

100. Mobarak, Y.

Effects of the droop speed governor and automatic generation control AGC on generator load sharing of power system

(2015) International Journal of Applied Power Engineering (IJAPE), 4 (2), pp. 84-95. Cited 9 times.

101. Porwal, A.

Modeling and simulation of svpwm based application

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (2), pp. 140-148. Cited 1 time.

102. Kumar Jha, B., Prasad Gupta, R., Prasad, U.

Combined operation of svc, pss and increasing inertia of machine for power system transient stability enhancement

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (1), pp. 15-22. Cited 2 times.

103. Rai, J. N.

Comparison of FACTS Devices for Two Area Power System Stability Enhancement using MATLAB Modelling

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (2), pp. 130-139. Cited 1 time.

104. Kadam, A. H., Unni, K., Thale, S.

Performance analysis of voltage stability against sudden load changes in voltage controlled inverters for distributed generation

(2014) International Journal of Applied Power Engineering (IJAPE), 3, pp. 33-40. Cited 2 times.

105. Nandurkar, S.R., Rajeev, M.

Modeling simulation & design of photovoltaic array with MPPT control techniques

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (1), pp. 41-50. Cited 14 times.

106. Kaushik, A., Varanasi, J.

Harmonic voltage distortions in power systems due to non linear loads

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (1), pp. 67-74. Cited 2 times.

107. Huafeng, Z., Xuanyu, Z., Di, S., Huashi, Z., Chaoyang, J.

PMU-based transmission line parameter identification at China southern power grid

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (3), pp. 190-198. Cited 1 time.

108. Manickavasagam, K.

Fuzzy logic controller based single buck boost converter for solar PV cell

(2014) International Journal of Applied Power Engineering (IJAPE), 3 (1), pp. 1-8. Cited 3 times.

109. Subbaraj, J.P., Manickavasagm, K.

Automatic Generation Control of MultiArea Power System with Generating Rate Constraints Using Computational Intelligence Techniques

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (1), pp. 27-38. Cited 2 times.

110. Zhou, M., Li, S.-D., Luo, X.-Y., Wang, D.

A new echo hiding algorithm with high robustness

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (4). Cited 1 time.

111. Asokan, K., Ashok Kumar, R.

A simple approach for optimal generation scheduling to maximize GENCOs profit using IPPD table and ABC algorithm under deregulated environment

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (3). Cited 1 time.

112. Hussin, M.Z., Omar, A.M., Zain, Z.M., Shaari, S.

Performance of grid-connected photovoltaic system in equatorial rainforest fully humid climate of Malaysia

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (3), pp. 105-114. Cited 15 times.

113. Al-Masri, H., Amoura, F.

Feasibility Study of A Hybrid Wind/PV System Connected to the Jordanian Grid

(2013) International Journal of Applied Power Engineering (IJAPE), 2, pp. 89-98. Cited 2 times.

114. Ghaffarzadeh, N., Akbari, M., Khanjanzadeh, A.

Distributed generation allocation to improve steady state voltage stability of distribution networks using imperialist competitive algorithm

(2013) International Journal of Applied Power Engineering (IJAPE, 2 (2), pp. 71-78. Cited 3 times.

115. Marefatjou, H., Sarvi, M.

Distributed generation allocation to improve steady state voltage stability of distribution networks using imperialist competitive algorithm

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (1), pp. 15-26. Cited 11 times.

116. Bhongade, S., Tyagi, B.

Participation of Renewable Energy Sources in Restructured Power System

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (1), pp. 1-14. Cited 1 time.

117. Ahmad, N.T.

Improving Electrical Power Grid of Jordan and Control the Voltage of Wind Turbines Using Smart Grid Techniques

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (1), pp. 39-44. Cited 1 time.

118. Chambers, T., Raush, J., Massiha, G.H.

Pilot solar thermal power plant station in Southwest Louisiana

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (1), pp. 31-40. Cited 8 times.

119. Ali, Q.W., Ul Asar, A.

Smart power transmission system using facts device

(2013) International Journal of Applied Power Engineering (IJAPE). (IJAPE), 2 (2), pp. 61-70. Cited 5 times.

120. Jamian, J., Mustafa, M., Mokhlis, H., Baharudin, M.

Implementation of evolutionary particle swarm optimization in distributed generation sizing

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (3), pp. 125-140. Cited 1 time.

121. Bagherinasab, A., Zadehbagheri, M., Khalid, S.A., Gandomkar, M., Azli, N.A.

Optimal Placement of D-STATCOM Using Hybrid Genetic and Ant Colony Algorithm to Losses Reduction

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (2), pp. 53-60. Cited 19 times.

122. Beithou, B.O., Al Alawin, N., Awad, A.A., Abdelhadi, Y., Al-Mofleh, A.

Experimental Study of a Vacuumed Solar Still System

(2013) International Journal of Applied Power Engineering (IJAPE). (IJAPE), 2 (3), pp. 99-104. Cited 3 times.

123. Avv, S., Karri, J.A.C.

Multi area economic dispatch using secant method and tie line matrix

(2013) International Journal of Applied Power Engineering (IJAPE), 2 (3). Cited 1 time.

124. Krautmann, J., Zhu, J.

Photovoltaic solar energy systems: Market trends in the United States

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 123-128. Cited 7 times.

125. Sarvi, M., Torabi, S.M.

Determination of Fault Location and Type in Distribution Systems using Clark Transformation and Neural Network

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (2), pp. 75-86. Cited 6 times.

126. Ghaffarzadeh, N., Marefatjo, H., Soltani, I.

Investigation and comparison of the effect of facts devices, capacitors and lines reactance variations on voltage stability improvement and loadability enhancement in two area power system

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 145-158. Cited 1 time.

127. Pryor, L, Collins, G.

Voltage stability based formation of voltage control areas considering impact of contingencies

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 287-339. Cited 1 time.

128. Li, W., Li, H., Luo, M., Zhang, Y.

Daily generation scheduling for reducing unit regulating frequency using multi-population genetic algorithm, Power and Energy Society General Meeting

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (1), pp. 1-12. Cited 3 times.

129. Javadi, Mohammad Sadegh

Security constraint unit commitment considering line and unit contingencies-particle swarm optimization

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (1), pp. 13-20. Cited 2 times.

130. Miah, A.M.

Comparative study on the performance of a coherency-based dynamic equivalent with the new inertial aggregation

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 105-114. Cited 3 times.

131. Marefatjou, H., Sarvi, M.

Compensation of Single-Phase and Three-Phase Voltage Sag and Swell Using Dynamic Voltage Restorer

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 129-144. Cited 12 times.

132. Najafi, H. R., Dastyar, F.

Dynamic Modeling of Autonomous Wind-Diesel system with Fixed-Speed Wind Turbine

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (2), pp. 47-64. Cited 1 time.

133. Manickavasagam, K.

Load frequency control of DFIG-isolated and grid connected mode

(2012) International Journal of Applied Power Engineering (IJAPE), 1, pp. 29-36. Cited 2 times.

134. Martolia, T., Verma, M.K.

Voltage stability based formation of voltage control areas considering impact of contingencies

(2012) International Journal of Applied Power Engineering (IJAPE), 1 (3), pp. 115-122. Cited 1 time.

135. Eteruddin, H., Mohd Zin, A.A.

Reduced Dielectric Losses for Underground Cable Distribution Systems

(2010) International Journal of Applied Power Engineering (IJAPE), 1 (1), pp. 37-46. Cited 3 times.

136. Miah, A.M.

Localized transient stability (LTS) method for real-time localized control

(2018) International Journal of Applied Power Engineering (IJAPE), 7 (1), pp. 73-86. Cited 1 time.

137. Soliman, M., Abdelaziz, A.Y., El-Hassani, R.M.

Distribution power system reconfiguration using whale optimization algorithm

(2020) International Journal of Applied Power Engineering (IJAPE), 9 (1), pp. 48-57. Cited 3 times.

138. Valavala, M.

Optimal Placement and Sizing of DG for loss minimization using ABC Optimization

(2021) International Journal of Applied Power Engineering (IJAPE), 10 (4), pp. 347-354. Cited 1 time.